Posted on August 21, 2014 by Martin Fisher -
A full range of corrugated steel culverts and stormwater storage tanks are available up to 2.2m diameter
Considerable material cost savings due to the reinforcing effect of the 4-ply lockseam.
Roundness perfect tube roundness ensured.
Tube length unlimited
A wide selection of sizes
Almost 50 years of experience
Posted on August 21, 2014 by Martin Fisher -
Colorduct is usually specified for either its aesthetic qualities (eg: exposed ductwork in offices and shopping malls), and/or for its protective properties (eg: swimming pools and external environments).
Protective properties
Wide range of colours available
Aesthetically pleasing
Aesthetic qualities
Available in full circular and flat oval ductwork
High quality
Posted on August 21, 2014 by Martin Fisher -
Wells are renowned as the premier source for quality stainless steel and aluminium ductwork. Any standard diameter or bespoke ductwork items can be manufactured to specification, and component can be manufactured as required.
SIZES
Start from 80mm – 2200mm
All sizes between the above are available.
Bespoke ductwork and Design service offered
High quality product
Full range of fabrications
Looks good and has a long life
Light weight and non-magnetic
Fully welded fittings (on request)
Posted on August 21, 2014 by Martin Fisher -
Typical applications include marine ductwork, bulk transfer ducts and external ventilation and exhaust systems used nationwide.
Material (m.g. = max gauge) Mild Steel (m.g. 2.3mm) Galvanised G275 and G600 (m.g. 2.3mm) Aluminium (m.g. 2.3mm) Stainless Steel 304 and 316 (L) (m.g. 1.2mm) • Diameters 80mm up to 2200mm.
High quality – high detail
Maximum strength
Tube length unlimited
Fully welded fittings
Tube lengths up to 10.0m
Massive choice of product specification
Posted on August 21, 2014 by Martin Fisher -
Description
Used onshore, off-shore and shipboard. Perforated accoustic ductwork is also available.
A full range of sizes available on request.
High detail – high quality.
Galvanised steel – low cost
Stainless steel – long life
Perforated – acoustic applications
EPDM Wells-Safe gaskets on fittings
Any standard fitting can be supplied pre-insulated
Wide product range – more choice
Posted on August 21, 2014 by Martin Fisher -
DESCRIPTION
Wellsafe is a range of EPDM rubber gaskets.
Its unique triple-lipped profile ensures a perfect air-tight seal to enable fast-track installation and eliminating conventional seals, mastic and tapes.
Type approved to DW142 high pressure leakage class D and withstands positive pressure up to 3000 Pa (300mm WG) negative pressures down to 5000 Pa (500mm WG)
Wellsafe EPDM rubber gaskets can be applied to any standard galvanised, aluminium or stainless steel circular fitting from the full Wells-Vent and Wells-Twin ductwork range.
Diameters from 80mm up to 1000mm.
Available on any standard circular fitting
Perfect air tightness
Reduces installation time
Resists temperature variations and rough handling on site
Remains adjustable after installation
Environmentally safe to use – no solvent compounds
Posted on August 21, 2014 by Martin Fisher -
The Metu and Ductmate flange and accessary systems fully compliment the Wells Spiral Duct product range
The range includes
Circular • Square • Rectangular and Oval
Flanges • Access Doors
Overcollars • Brackets
Considerable material cost savings due to the reinforcing effect of the 4-ply lockseam.
Roundness perfect tube roundness ensured.
Tube length unlimited
Considerable material cost savings due to the reinforcing effect of the 4-ply lockseam.
Considerable material cost savings due to the reinforcing effect of the 4-ply lockseam.
Considerable material cost savings Due to the reinforcing effect of the 4-ply lockseam.
Posted on August 21, 2014 by Martin Fisher -
Flat Oval has many advantages over rectangular duct: better airflow, lighter weight, longer lengths, rapid availability, easy to adjust to length and easier to install.
A full range of matching fittings are available for all sizes of Flat Oval ductwork.
A full range is available to either DW144 standard. Tube is available in either 1.5m or 3.0m standard lengths.
Lighter weight than the rectangular
Better airflow
Tube length up to 3 metres which enables longer lengths between joints
A wide range of fittings available
Upto 30% material cost savings
Rapid availability due to being manufactured in house
Posted on August 21, 2014 by Martin Fisher -
Balancing, blast gate and volume control dampers available to suit a range of sizes and diameters. Fire Dampers also available to suit.
A full range of accessories include:
Hangers • Supports • Brackets • Strapping Connectors • Channel • Nuts and Washers Screwed Rod • Rivets • Self-Drilling Screws Flanging Systems • Tapes • Sealants • Flexible Connectors • Crocostrip • Toggles and Latches Heat Shrinks • Pipe Flashings • Cowls
A wide range available
High volume of stock
Manufactured to order
Metric and imperial sizes available
All stock to DW142
All offsets fabricated to order
Posted on August 21, 2014 by Martin Fisher -
A full range available in steel, aluminium, and polymid construction in any size and diameter.
Full range and varied range available
Various shape options
Painted finish is available
Rapid manufacturing service available
Wide range of stock
*
Established in 1967 Wells are one of the oldest and biggest British Independents in the business and offer by far the widest range of standard and tailor-made spiral tubes in Europe. Our fourteen tube manufacturing machines enable us to produce spiral tubing in mild steel, galvanised, aluzinc, aluminium and stainless steel as standard in diameters from 41mm up to 2200mm, and in gauges from 0.4mm up to 2.5mm. This facility is backed up by an integral sheet metal work fabrication unit employing the latest CAD/CAM plasma techniques. We believe this capacity to be unrivalled in Europe, and our speed, quality of manufacture, delivery and reputation are unequalled by anyone.
Recent Comments